Vintage Receiver / (2) CD Players (Can I use Tape 1 and AUX)?

Replied on October 5, Hi, I would suggest you to please go through the following steps and check if it helps. Check the connections between components and make sure they are secure before proceeding to the next Step. Sometimes, loose connections can cause a hum. Separate the audio cables from the power cables; electromagnetic interference from the power cables can cause stereo hum. Use cable ties to secure the audio cables away from the power cables. Plug in a surge protector to the outlet, and then plug all the components into that surge protector. Connect a ground plug to the surge protector and then plug the ground plug into the main outlet. A ground plug is available at any hardware store, and turns a three prong connection into a two prong.

Vintage Receiver / (2) CD Players (Can I use Tape 1 and AUX)?

Whether you’ve inherited your father’s vinyl collection or you’re an audiophile that just prefers the sound quality of records, chances are you’ll need a good phono preamp to connect your turntable to your modern stereo system. If you’re planning on hooking up your turntable to a stereo receiver, you’re going to want this preamp to get the high sound quality that you expect from vinyl.

Do I Really Need It? Most likely, you do. The majority of newer stereo receivers lack a phono input, which would directly connect them to the turntable.

Easy setup allows you to quickly hook up the preamp to both turntable and audio device so you can be enjoying your vinyl records in no time Compact preamp gives you the ability to connect your turntable to your stereo receiver, speakers or other audio device/5(43).

We’ll cover your items for 6 years and give you your money back if unused. Free UK delivery Next day delivery and timed options available. Please see checkout for further details. We’re confident that our prices are amongst the very keenest out there, so we’ve made it as easy as pie to qualify for our Price Beat.

Products must be brand new, boxed, carry a comparable guarantee and be in stock at time of purchase. Find out more We offer 6 month interest free options. From here, the choice is yours. Load them on to your MP3 player or NAS drive, record on to CD or just have the records archived on your computer – whatever your choice, your LPs are now more accessible than ever before.

A built-in phono stage means you don’t have to have a hi-fi with a phono pre-amp built-in – any AUX input will work fine. It also comes with an RCA – 3. Quality Audio Technica sound Coming from one of the most highly respected names in cartridges, the LP60USB has better sound quality than most of its rivals. The supplied cartridge is one of AT’s own and gives excellent tracking for a smooth, balanced sound.

Phono Pre-Amps

Converting Vinyl to mp3 Hi Gloria C Being a bit of a tightwad, I refuse to pay extra bucks for something that I already own, so I chose not to purchase a USB turntable; I just use my existing stereo turntable circa and amplifier circa I connect the headphone socket on the amplifier to an analogue to digital converter. This unit then connects to your PC, and the included software then allows you to record your old vinyls to digital format.

By all means, if you have more ambitious aspirations for your stereo, then get that receiver, but if you’re trying to save money while buying your turntable setup, you can leave that budget receiver on the shelf at .

What if I only have headphones or speaker outputs? The audio input on your computer You can look at your computer being a cassette or tape deck on which you want to record. You have probably done that before. The Line-In input is sometimes marked with the symbol which is not to be confused with the speaker output marked with the symbol where the arrow points to the outside. To record from the connected player, in Free Audio Editor you typically select the sound source named Line-In or Auxiliary: To record from the connected player, in the Sound Recorder window you typically select the sound source named Mic or Microphone: If your laptop or notebook or its docking station has a Line-In or Aux input jack as well, then it is preferable to connect the player to that input.

In that case you typically select the sound source named Line-In or Auxiliary. Note that this stereo mini-plug has two plastic rings at the tip and this is not to be confused with a mono plug that has only one plastic ring at the tip: Using a mono plug to connect the player to the computer, typically results in sound coming in on the left channel only.

The audio output on the player What the audio output connection type on the player is, depends on the kind and model of the player. DIN connectors This type of connector is usually found on older European-made audio equipment, like on this Uher tape deck: Mini-jack connectors This type of connector is most times found on portable players, like on this Sony minidisk player:

Streaming Vinyl With A Sonos Connect:Amp

Connecting your Mac to your stereo is a great way to improve sound quality tenfold. Luckily, most Macs save a few PowerBook Duos have a headphone jack. You can use this port to connect your Mac not only headphones, but to a stereo system as well. It looks like a headphone connection that converts to the connection for audio ports that most receivers have RCA connectors are usually red and white or black and white.

Turn off your computer and plug in the connection that looks like a headphone connector.

Sony BLUETOOTH Connectivity 2 Channel Stereo Receiver with Turntable Input, 4 Audio Inputs, A/B Speaker Function & FM tuner + Remote Control + HeroFiber Ultra Gentle Cleaning Cloth by HeroFiber $ $ 95 Prime.

And, thanks to our exclusive Denon Setup Assistant, you can quickly and easily customize the AVR-S BT for your particular speakers and source components to ensure top audio performance. With the AVR-S BT’s Bluetooth technology, you can wirelessly stream your favorite audio tracks from a broad range of Bluetooth-enabled devices, such as smartphones, tablets and portable audio players.

With the AVR-S BT’s built-in Bluetooth streaming function, you can wirelessly stream your favorite content without needing to purchase expensive adaptors. The Setup Assistant features clear on-screen graphics and text that optimizes critical system settings for your particular home theater setup. During the automated setup process, the included measuring microphone determines the right combination of optimum settings to deliver the best possible sound quality from your particular speaker system.

With dual subwoofers, which can be placed in different parts of the room, you’ll benefit from response averaging, which helps provide smoother and more detailed deep bass, compared to a conventional single subwoofer speaker system. Discrete Amplification The AVR-S BT features a powerful Class AB power amplifier section equipped with discrete high current power transistors, and is rated at a maximum of watts per channel for each of the 5 channels. With Quick Select, the AVR-S BT remembers not only your preferred inputs but also your preferred audio settings, so you can enjoy precisely tailored sound with each one.

Stylish Front Panel Design The AVR-S BT features a stylish and ergonomic front panel design, with our new brushed hairline metalized finish, along with dual control knobs for volume and input selection. The front panel graphical display features clear text and easy to understand icons. Color Coded Speaker Terminals For quick and easy connections during setup, the AVR-S BT features color coded loudspeaker terminals, and the supplied color coded speaker cable labels ensure the correct speaker hookups the very first time.

Did you know that your browser is out of date?

It does not have ports, so you are supposed to use the wires that it already has. The wires are very short Low recording level through USB Although, the AT-LP60USB Turntable lacks built-in speakers like other record players, it looks quite affordable at this price when you consider its high-performance output, durability, compatibility and portability. The real benefit is, you will get 2-year warranty on purchase.

It is constructed of wood and bound in a leatherette material and styled like a briefcase.

You can, however, use a receiver without phono inputs by connecting an external phono preamplifier between the turntable and the receiver. Turn power off to your receiver, turntable and preamp. Connect the two output audio cables coming from the turntable to the preamp’s inputs.

But does it equal them in sound? Its reasonable price will satisfy those looking for a fully automatic turntable that produces great sound. Deconstructing the Denon DP F Vintage Denon turntables tend to be either semi-automatic or automatic, and Denon have continued this trend with their new offerings. Also included is a cueing lever to allow the user to select tracks on the record, a must for any good automatic turntable.

I generally find automatic play a little slow and enjoy using the manual cueing lever more often than not, but the automatic option can be nice in dim environments. Another nice thing about the automatic function is that it makes using the turntable easy for guests that are not familiar with vinyl, as they can safely push play and spin vinyl of their choosing without risking damage to your records. The motor is a belt drive DC motor as opposed to AC which allows you to use the turntable on different voltages i.

It would fit right in to a vintage amplifier and speakers set-up. This means it can be used on any modern amplifier or receiver.

How to Connect a Turntable to a Receiver Without a Phono Input

Originally Posted by kegobeer Yes, you can output audio from antenna sources. Refer to page 29 on the manual. Each input has separate picture adjustments, so you can tweak each one for your needs. The color reproduction from an Xbox might need different settings than for a cable box; having different settings means you don’t have to constantly switch back and forth. It is a great piece of hardware that meets my needs – but I don’t need to run audio from the switch, since I use HDMI for all of the aduio.

What is a DD?

Everything you need to know about hooking up a vintage turntable First things first – the simple setup: If you’re hooking your vintage turntable to a stereo receiver or amplifier that has jacks on the back marked “PHONO,” it’s easy: Plug the matching cables coming from your turntable in the phono jacks.

That little oft-neglected port can be a real life saver, though. Be it analog or digital, the signal is sent as an electrical impulse over conductive wire. Unlike other cabling standards, the optical audio system uses fiber optic cables and laser light to transmit digital audio signals between devices. The standard was introduced way back in by Toshiba, and was originally intended for use with their fledgling Compact Disc players. Even more distinctive than shape is the fact that when the device is powered on, you can see a faint glow of red laser light around the port door.

So why is the lonely optical cable so underutilized? You can pipe the HDMI video from the source say your cable box into your TV, then turn right back around and pipe the optical audio out to your receiver and speaker system. If you have any reason at all to isolate the audio signal from a digital source it is almost always, without a doubt, easiest to do so via TOSLINK cables. Eliminating Ground Loop Hum Ground loops are, from an electrical engineering standpoint, a fairly complex subject.

One of the most common causes of a ground loop in home media gear is poorly grounded cable TV equipment. In this situation, your power outlets and the connected media equipment are on one ground hopefully, if your house is up to code, the main earth-ground spike outside but the coax cable is grounded to another ground often a water-pipe ground if there is a water pipe or spigot near where the cable enters the home.

New Turntable & Receiver (Home Theater Tour 9)